Ball Head Jig - This mold makes professional quality jigs. Can be used with lead and/or bismuth.
Production mold for lead jigs in varying sizes and weights.
When ordering the 14 Cavity, larger hooks will not fit in both sides at the same time.
Ball Heads are also available in and EWG hook mold here: EWG - Offset Wide Gap
and in micro sizes down to 1/100oz here: Micro Ball Head
Reviews
-
Ball Head Jig Mold
This is a great mold that produces a clean and professional finish. The gigs are easily separated from the mold. There is no flashing. Great work.
-
Jig mold
Very clean, definitely worth the wait time.
-
Great mold
Works very well with bottom pouring or ladles. Nice and clean doesn't have a large sprue.pours great every time.
-
1/16, 1/32, 1/48
The quality of these molds is insane. I started off with do it molds while this was just a way to make my own jig heads to save money. Transitioned into a business and the difference in both quality and accuracy is CRAZY. These blow the Do-It molds out of the water
-
Ball head jig mold 1/8oz
Only complaint is if you are using #2hooks you can only do 12 jigs not 14 jigs the alignment dowel is in a position that you cannot put a #2 hook on each side
-
Round ball head
FGF is best mold I have. I have several mold from FGF planning to buy molds.
-
Great size of jighead
perfect size for bluegill, but also catches the crappie
-
14 cavity ball head mold
These are the best molds I have ever used. Superior quality! I highly recommend.